CMU-1200
Features:
Specifications:
Technology:
|
UPS type
|
Off-Line
|
|
Form factor
|
Tower
|
Input parameters:
|
Power
|
480 VA
|
|
Current frequency
|
(50/60)±1Hz (Frequency self-adapt system)
|
Output parameters:
|
Output voltage
|
220 / 230V ± 10%
|
|
Form voltage
|
Stepped approximation to a sinewave
|
|
Current frequency
|
50/60 Hz ± 1%
|
|
Switching time
|
2-4 ms, including the determination of the time
|
|
Automatic voltage regulation (AVR)
|
1 step down, two steps up
|
Protection and UPS equipment:
|
Surge Protection
|
Yes
|
|
Overloads protectio
|
110% < Load percentage <120%, buzze beeps; load percentage >120%. output shuts off, buzzer beeps continuosly
|
|
Protection for UPS input
|
Fuse for overload protection and short circuit protection
|
|
UPS protection for short circuit
|
Immediate shutdown of the UPS using the input fuse
|
|
Protect the phone, fax, modem, LAN
|
No
|
Ports and interfaces:
Battery:
|
A type
|
Lead acid, sealed, maintenance-free
|
|
Voltage and battery capacity
|
12V / 4,5AH x 1
|
|
Typical recharge time
|
8 hours (up to full capacity of the battery)
|
|
Estimated battery backup time (at 50% load)
|
-
|
|
Estimated battery backup time (at 100% load)
|
-
|
|
Connecting additional battery
|
No
|
|
Cold start
|
Yes
|
|
Battery protection
|
Automatic verification of the battery and when the protection of the critical category
|
Physical parameters:
|
Output connectors
|
1 x Euro (Schuko) + 1 x IEC (Bypass)
|
|
UPS Dimensions (W * D * B) mm
|
280*101*142 mm
|
|
Weight, kg
|
3.4 kg
|
|
Indication
|
LED (green LED - supply from the mains power, yellow LED - work redime of battery, red LED - overload or fault)
|
|
Sound alarm
|
Standby mode - a rare acoustic signal (1 every 5 seconds, then repeat every 60 seconds);†low battery level - sound beeps (last 16 seconds);†overload - a very special sound signal (every 2 seconds);
|
Case features:
Electrical connection to the front:
Online prices, specifications, description and images generally match actual, but may vary and are subject to change without notice. GTstore.pk cannot be held liable for errors or omissions.
Please verify the specifications at the time of purchase. No claim whatsoever would be accepted in case of specification error/mismatch, once the product is sold.
