QNAP TS-832PX-4G 8 Bay 2.5GbE PCIe Expansion NAS Enclosure
High-capacity NAS with 10GbE SFP+ and 2.5GbE, Supports PCIe Expansion for M.2 SSDs to Accelerate Applications
TECH SPECS:
CPU AnnapurnaLabs Alpine AL324 ARM® Cortex-A57 4-core 1.7GHz processor
CPU Architecture 64-bit ARM
Encryption Engine
System Memory 4 GB SODIMM DDR4
Maximum Memory 16 GB (1 x 16 GB)
Memory Slot 1 x SODIMM DDR4
Flash Memory 512 MB (Dual boot OS protection)
Drive Bay 8 x 3.5-inch SATA 6Gb/s, 3Gb/s
Drive Compatibility 3.5-inch bays:
3.5-inch SATA hard disk drives
2.5-inch SATA hard disk drives
2.5-inch SATA solid state drives
Hot-swappable (Not supported M.2 SSD)
M.2 Slot Optional via a PCIe adapter
SSD Cache Acceleration Support
2.5 Gigabit Ethernet Port (2.5G/1G/100M) 2 (2.5G/1G/100M/10M)
10 Gigabit Ethernet Port 2 x 10GbE SFP+
Wake on LAN (WOL)
Only the 2.5GbE port
Jumbo Frame
PCIe Slot 1
Slot 1: PCIe Gen 2 x2
PCIe bandwidth limitations will restrict the NAS 10GbE performance.
Card dimensions for PCIe slot:210 x 68.9x 24.76 mm / 8.27 x 2.71 x 0.97 inches.
USB 3.2 Gen 1 port 3
Form Factor Tower
LED Indicators System Status, LAN, USB, HDD1~8
Buttons Power, Reset, USB Copy
Dimensions (HxWxD) 180.2 × 329.3 × 280.8 mm
Dimensions do not include foot pad (foot pad may be up to 30mm / 1.18 inches high depending on model)
Weight (Net) 7.05 kg
Weight (Gross) 8 kg
Operating Temperature 0 - 40 °C (32°F - 104°F)
Storage Temperature -20 - 70°C (-4°F - 158°F)
Relative Humidity 5-95% RH non-condensing, wet bulb: 27ËšC (80.6ËšF)
Power Supply Unit 250W, 100-240V AC, 50/60Hz, 3.5A
Power Consumption: Disk Standby Mode 27.949 W
Power Consumption: Operating Mode, Typical 50.858 W
Tested with drives fully populated.
Fan System fan: 2 x 120mm, 12VDC
CPU fan: 1 x 60mm
System Warning Voice prompts or Buzzer
Online prices, specifications, description and images generally match actual, but may vary and are subject to change without notice. GTstore.pk cannot be held liable for errors or omissions.
Please verify the specifications at the time of purchase. No claim whatsoever would be accepted in case of specification error/mismatch, once the product is sold