General
Product Dimensions (W × H × D)
92 mm × 187 mm × 58 mm (3.62'' × 7.36'' × 2.28'')
Package Dimensions (W × H × D)
132 mm × 228 mm × 91 mm (5.19" × 8.97" × 3.58")
Net Weight
0.307 kg (0.677 lb)
Gross Weight
0.807 kg (1.779 lb)
Packing List
Wireless Bridge × 1,Power Adapter (12 VDC, 1 A) × 1,Binding Tape × 2,Quick Start Guide ×1
Packing Method
Single unit packing
Working Temperature
-30 °C to 70 °C (-22 °F to 158 °F)
Working Humidity
5% to 95% (no condensation)
Storage Temperature
-40 °C to 85 °C (-40 °F to 185 °F)
Storage Humidity
5% to 95% (no condensation)
Installation Mode
Pole Mounting
Ingress Protection
IP55
Power Consumption
3 W for typical (1-ch 2MP IPC), Max. 7.5 W
Wireless Parameter
Max. Transmission Rate Of Air Interface
≤ 867 Mbps
Wireless Standard
IEEE 802.11/a/n/ac
Working Frequency Band
5150 MHz ~ 5250 MHz,5250 MHz~ 5350 MHz,5470 MHz~ 5725 MHz,5725 MHz~ 5850 MHz
Antenna Gain
12 dBi
Antenna Angle
(H) Beamwidth [3 dB] 35° (V) Beamwidth [3 dB] 35°
Transmitting Power
30 dBm @11ac MCS0 (Note: Transmitting power may vary with local regulations.)
Receiving Sensitivity
-86±2dBm@AC80-MCS0
Throughput Rate
PTP: ,230 Mbps/1 KM(AC80),200 Mbps/5 KM(AC80),20 Mbps/15 KM(AC80),PTMP(1 to 8): ,80 Mbps/5 KM(AC80)
Hardware Parameter
Network Interface
2 × 1000 Mbps RJ45 ports
LED Indicator
Power indicator,LAN indicator,Signal intensity indicator
Reset
Hardware resetting button
Power Supply
12-24 VDC/1 A Passive PoE
Software Function
Application Function
TDMA,DFS,TPC,IFM,IPM
Channel Width
20/40/80 MHz
Channel Selection
Auto/manual selection
Network Protocol
NTP (network time synchronization),SADP (auto search for IP address),HTTPS (web management),SSH (debugging)
Security Mode
WPA2-PSK
Security Mechanism
Wireless network name hidden
Management Method
Web,HCP
Upgrade
Web,iVMS-4200
System Log
Syslog,Control center information
HPP
Support one-click activation and remote management via Hik-Partner Pro. Functions supported:
1. Reboot device
2. Restore device
3. Display the topology information
4. Display the connection status between AP and CPEs, including signal intensity, backgroud noise, sending & receiving rate
5. Configure wireless settings, including working mode, SSID, password, channel, channel bandwidth, transmitting power
6. Bridge alignment
7. Spectrum scanning
Approval
EMC
CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
Safety
UL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
Chemistry
CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
Radio
EN 301 893,EN 300 440,EN 62311,EN 301 489-3,EN 301 489-17,FCC Part 15.247
