EAP225-Wall
Omada Wireless Wall-Plate Access Point
Complete In Room Wi-Fi Coverage:
An EAP in each room guarantees a strong wireless signal and allows guests to enjoy their own private Wi-Fi network.
Effortless Deployment and Scalability:
With 802.3af/802.3at Power over Ethernet supported there’s no need to install additional wiring in the building. Simply plug in existing Ethernet cables and you’re ready to go.
Installation Made Easy:
Upgrade Ethernet wall jacks to high-performance Wi-Fi access points. The EAPs can be fitted to existing EU or US wall junction boxes, making installation quick and non-disruptive.
Three Ethernet Jacks, One PoE Outlet:
More than just a wireless access point, EAP225-Wall acts as a switch and provides three standard Ethernet jacks together with a Power over Ethernet outlet, capable of powering wired devices such as IP phones, IP cameras, intercoms and more.
Blends into Your Wall:
The EAP225-Wall wireless access point blends into any business setting with a refined, minimalist appearance.
Gigabit Wi-Fi Speeds with MU-MIMO Technology:
EAP225-Wall delivers combined dual-band speeds of up to 1200Mbps. Armed with the latest 802.11ac Wave 2 MU-MIMO technology, it can exchange data with multiple clients at the same time to allow more devices to connect without any slowdown to the network.
Cloud Management – Anywhere, Anytime:
Omada offers cloud access to its centralized management platform. Take your network with you, wherever you go.
#Access Point #online-shopping-Access point #gtstore
Specifications:
|
HARDWARE FEATURES:
|
|
Interface
|
1 × 10/100Mbps Ethernet uplink port accepts 802.3af/at power supply as PoE power device (PD)
2 × 10/100Mbps Ethernet Port
1 × 10/100Mbps with PoE pass-thru (requires 802.3at PoE+ power supply on PD port.)
|
|
Physical Security Lock
|
Yes
|
|
Button
|
Reset
|
|
Power Supply
|
802.3af or 802.3at PoE
|
|
Power Consumption
|
9 watts or
25.5 watts including PoE Out
|
|
Dimensions
|
5.6 × 3.4 × 0.8 in.
(143 × 86 × 19.7mm)
|
|
Antenna
|
2 Dual-Band Antennas
2.4GHz: 2 × 3dBi
5GHz: 2 × 4dBi
|
|
Mounting
|
Wall Plate Mounting
|
|
WIRELESS FEATURES:
|
|
Wireless Standards
|
IEEE 802.11n/g/b/ac
|
|
Frequency
|
2.4GHz and 5GHz
|
|
Signal Rate
|
• 5 GHz: Up to 867 Mbps
• 2.4 GHz: Up to 300 Mbps
|
|
Wireless Functions
|
16 SSIDs（Up to 8 SSIDs on each band）
Enable/Disable Wireless Radio
Automatic Channel Assignment
Transmit Power Control (Adjust Transmit Power on dBm)
QoS(WMM)
Load Balance
Rate Limit
Reboot Schedule
Wireless Schedule
Wireless Statistics based on SSID/AP/Client
|
|
Wireless Security
|
Captive Portal Authentication
Access Control
Wireless Mac Address Filtering
Wireless Isolation Between Clients
SSID to VLAN Mapping
Local LAN port based VLAN
Rogue AP Detection
802.1X Support
64/128/152-bit WEP / WPA / WPA2-Enterprise,
WPA-PSK / WPA2-PSK
|
|
Transmission Power
|
21dBm max. (2.4 GHz)
21 dBm max. (5 GHz)
|
|
MANAGEMENT:
|
|
Omada Cloud Access
|
Yes
|
|
Omada App
|
Yes
|
|
Omada Cloud Controller
|
Yes
|
|
Centralized Management
|
• Omada Hardware Controller (OC300)
• Omada Hardware Controller (OC200)
• Omada Software Controller
|
|
Omada Controller Software
|
Yes
|
|
Cloud Access
|
Yes (Through OC300, OC200, or Omada Software Controller)
|
|
Email Alerts
|
Yes
|
|
LED ON/OFF Control
|
Yes
|
|
Management MAC Access Control
|
Yes
|
|
SNMP
|
v1,v2c
|
|
System Logging Local/Remote Syslog
|
Local/Remote Syslog
|
|
SSH
|
Yes
|
|
Web-based Management
|
HTTP/HTTPS
|
|
L3 Management
|
Yes
|
|
Multi-site Management
|
Yes
|
|
Management VLAN
|
Yes
|
|
OTHERS:
|
|
Certification
|
FCC, RoHS
|
|
Package Contents
|
AC1200 MU-MIMO Wall-Plate Access Point
EAP225-Wall
Installation Guide
Mounting Screw
|
|
Environment
|
Operating Temperature: 0℃~40℃ (32℉~104℉)
Storage Temperature: -40℃~70℃ (-40℉~158℉)
Operating Humidity: 10%~90% non-condensing
Storage Humidity: 5%~90% non-condensing
|
Online prices, specifications, description and images generally match actual, but may vary and are subject to change without notice. GTstore.pk cannot be held liable for errors or omissions.
Please verify the specifications at the time of purchase. No claim whatsoever would be accepted in case of specification error/mismatch, once the product is sold.
|
